Study of Eye Drops Dispensing and Dose Variability by Using Plastic Dropper Tips

ABSTRACT

The application of eye drops from flexible dropper bottles fitted with different types of dropper tips is associated with the high variability of eye drop weights. The aim of this report was to investigate the simultaneous effect of three factors influencing the mean weight of drops dispensing from two plastic dropper tips. Using a designed experiment (Box-Behnken), the effect of the concentration of benzalkonium chloride solutions (BAC) in the range of 0–0.02%, the dispensing angle from 90° to 30° from horizontal, and the residual volume of liquid in the dropper bottle from 4 to 10 mL on the mean drop weights were examined. The significant effect of the increase in BAC concentration resulted in a linear decrease in drop weights for both of the dropper tips investigated. The significant effect of the dispensing angle was influenced by the dropper tip design. For the dropper tip A, the effect of the dropper tip tilt was described by the quadratic equation with a minimum, which corresponded to the dispensing angle equal to that of 48° from horizontal. Below this angle, the increase in drop weights occurred due to the drop formation from the wetted external surface of the tip orifice. The linear decrease in drop weights in response to the decrease in dispensing angle was detected for the dropper tip B. The regression equations and the contour line plots obtained allowed the drop weights to be estimated for the actual combinations of both the BAC concentration and the dispensing angle. The effect of the residual volume was found to be non-significant. Based on the formula of Tate's law, the direct proportion between surface tension of a solution and the radius of the effective perimeter of a dropper tip can be used to estimate the theoretical maximal weight of drops at the dispensing angle of 90°. Using the stalagmometric values of surface tension of the BAC solutions, the maximal drop weights were estimated for both of the dropper tips investigated. A comparison between the theoretical and the experimentally measured drop weights enabled the dropper tips behavior to be discussed by using Harkins and Brown correction factor F. The F-value of 0.74 noted for the dropper tip A differed from that of stalagmometer F-value (0.61) indicating a deviation from the simple drop formation process in answer to more complicated design of the dropper tip A. On the other hand, the F-value of 0.6 observed for the dropper tip B demonstrated the better consistency with stalagmometry. As a result, the dropper tip B with the linear decrease of drop weights in response to the increased concentration of BAC and the decreased dispensing angle without the adverse external drop formation could be recommended in real drop dispensing.     

Power supplies for plasma column control in the COMPASS tokamak

The main magnetic fields in COMPASS – i.e. The Toroidal, Magnetising, Equilibrium, and Shaping Fields – are created by a set of four corresponding thyristor power supplies controlled in a 0.5 ms loop.The plasma position has to be controlled both radially and vertically by two additional magnetic fields provided by two fast amplifiers (FAs) based on MOSFET technology, each supplying ±100 V and up to ±5 kA.Currently, an ongoing project aims at ELM triggering by fast changes of the vertical position of the plasma column, also referred to as vertical kicks. For this purpose, a new Vertical Kicks Power Supply (VKPS) capable of quick change of vertical plasma position is being constructed. This power supply should operate at up to 1.2 kV with switching frequency up to 5 kHz. It is designed as a H-bridge but based on IGBT transistors which can be operated at higher voltages than MOSFETs.In this paper, we focus on the FAs and VKPS engineering design and required output parameters. Both the power supplies are based on modern components with highest available ratings in their categories. Unique design of the power supplies takes advantage of the short duration of the COMPASS discharge by overloading the transistors above their maximal steady-state rating.The FA is regularly operating, so that in addition to describing its design, we also describe the achieved performance parameters. Finally, the common controller unit, communication, and error handling is described.     

Advances in Catalyst Systems for the Asymmetric Hydrogenation and Transfer Hydrogenation of Ketones

Hydrogenation of prochiral ketones using chiral transition-metal catalysts represents the cleanest way to access enantiomerically enriched secondary alcohols, which are important building blocks in fine chemicals synthesis. Despite excellent activity, selectivity and compatibility of metal complexes with variety of functional groups, no universal catalysts exist. In this article we summarize the advances in catalyst systems for the asymmetric homogenous and heterogenous hydrogenation of ketones that have been made in past decade. The development of catalysts is oriented in reaching as high as activity with low catalyst loadings, using “greener’’ conditions, and ensuring good recyclability of catalysts. Even though ruthenium complexes represent the largest part of the catalysts, other metals rapidly penetrate this field.     

Damage driven crack initiation and propagation in ductile metals using XFEM

Originally Continuum Damage Mechanics and Fracture Mechanics evolved separately. However, when it comes to ductile fracture, an unified approach is quite beneficial for an accurate modelling of this phenomenon. Ductile materials may undergo moderate to large plastic deformations and internal degradation phenomena which are well described by continuum theories. Nevertheless in the final stages of failure, a discontinuous methodology is essential to represent surface decohesion and macro-crack propagation. In this work, XFEM is combined with the Lemaitre ductile damage model in a way that crack initiation and propagation are governed by the evolution of damage. The model was built under a finite strain assumption and a non-local integral formulation is applied to avoid pathological mesh dependence. The efficiency of the proposed methodology is evaluated through various numerical examples.     

SEM and EDS investigation of a pyrolytic carbon covered C/C composite maxillofacial implant retrieved from the human body after 8 years

The long term effect of the human body on a pyrolytic carbon covered C/C composite maxillofacial implant (CarBulat^Tm) was investigated by comparing the structure, the surface morphology and composition of an implant retrieved after 8 years to a sterilized, but not implanted one. Although the thickness of the carbon fibres constituting the implants did not change during the 8 year period, the surface of the implant retrieved was covered with a thin surface layer not present on the unimplanted implant. The composition of this layer is identical to the composition of the underlying carbon fibres. Calcium can only be detected on the surface as a trace element implying that the new layer is not formed by bone tissue. Residual soft tissue penetrating the bulk material between the carbon fibre bunches was found on the retrieved implant indicating the importance of the surface morphology in tissue growth and adhering to implants.     

Inhomogeneous softening during annealing of ultrafine-grained silver processed by HPT

The softening in ultrafine-grained silver processed by high-pressure torsion (HPT) was studied during annealing using differential scanning calorimetry (DSC). Two separate exothermic peaks were observed in the DSC thermogram of the HPT-processed sample. It is shown that the first and the second peaks are related to the recrystallization of the middle volume and the surface regions of the HPT-processed disk, respectively. Therefore, a very inhomogeneous sandwich-like microstructure develops during annealing with a soft interior and hard surface layers. The lower thermal stability of the middle region appears to be related to the stronger twinning activity since the twinned volumes can act as nuclei for recrystallized grains. The higher twin-fault probability in the interior is attributed to the larger strain due to the outflow of material between the anvils of the HPT facility during quasi-constrained processing.     

Investigating the tension load of rubber composites by impact dynamic testing

This work deals with establishing the tension load by impact dynamic testing of rubber composite conveyor belts. The value of tension load affects the shape of the used impactor and use of a support system as well as the weight of the ram and the impact height. An increase in the allowable stress when the belt is tensioned was examined during the test, to determine the effect of impact on the tension load. The obtained values of tension load are assessed using basic mathematical and statistical methods. Using the Design of Experiments method, factors that significantly affect the value of the tension load are identified.     

Corrosion of NiTi Wires with Cracked Oxide Layer

Corrosion behavior of superelastic NiTi shape memory alloy wires with cracked TiO₂ surface oxide layers was investigated by electrochemical corrosion tests (Electrochemical Impedance Spectroscopy, Open Circuit Potential, and Potentiodynamic Polarization) on wires bent into U-shapes of various bending radii. Cracks within the oxide on the surface of the bent wires were observed by FIB–SEM and TEM methods. The density and width of the surface oxide cracks dramatically increase with decreasing bending radius. The results of electrochemical experiments consistently show that corrosion properties of NiTi wires with cracked oxide layers (static load keeps the cracks opened) are inferior compared to the corrosion properties of the straight NiTi wires covered by virgin uncracked oxides. Out of the three methods employed, the Electrochemical Impedance Spectroscopy seems to be the most appropriate test for the electrochemical characterization of the cracked oxide layers, since the impedance curves (Nyquist plot) of differently bent NiTi wires can be associated with increasing state of the surface cracking and since the NiTi wires are exposed to similar conditions as the surfaces of NiTi implants in human body. On the other hand, the potentiodynamic polarization test accelerates the corrosion processes and provides clear evidence that the corrosion resistance of bent superelastic NiTi wires degrades with oxide cracking.     

Explaining prediction models and individual predictions with feature contributions

We present a sensitivity analysis-based method for explaining prediction models that can be applied to any type of classification or regression model. Its advantage over existing general methods is that all subsets of input features are perturbed, so interactions and redundancies between features are taken into account. Furthermore, when explaining an additive model, the method is equivalent to commonly used additive model-specific methods. We illustrate the method’s usefulness with examples from artificial and real-world data sets and an empirical analysis of running times. Results from a controlled experiment with 122 participants suggest that the method’s explanations improved the participants’ understanding of the model.